Tel : 0514-88223630 88221954 88238287
Fax: 0514-88232382 88223630
Address:Baoying County in Jiangsu Province on the 11th Mountain Road
Website: http://www.kelongmotor.com
 Motor >>  ZBL4 series fully closed DC motor >> Details
 
  
    Product Description
ZBL4 series fully closed DC motor
一.Characteristics and uses
  ZBL4 series fully closed direct cooling type DC motor, is my factory in Z4 series of forced air-cooled motor on the development of new products. Besides its original ZBL4 series motor characteristic of small volume, light weight, large output power, fully applicable to static integration of electric current and other characteristics, but also has a closed casing, therefore particularly suitable for dust and metal scraps and other places.
 This series motor adopts the lamination machine, so the application conditions for static rectifier power supply, and can withstand current changes the whole machine cannot achieve rate, the stator adopts an octagonal structure, space utilization high, pole installation location is exact, and using computer aided design, so that the electrical parameter control properly, thus reversing the motor's performance well, the outer surface of the base with a radiating rib special, increases the effective surface area for heat dissipation motor. In order to improve the output power of the motor under the effective volume.
F insulating materials used motor. Insulation structure of novel and reliable, to ensure stable performance and good heat insulation.
Rated voltage of the motor 400 volts or 440 Volts, in three-phase full-controlled bridge rectifier power supply and no external conditions of DC smoothing reactor, long-term stable operation. Rated voltage of 160 volt motor consists of a single-phase power supply rectifier bridge, at this time is the ripple current, the motor circuit must access the DC smoothing reactor, the inductance value see technical data sheet.
Installation dimension of the series motor in addition to the two foot hole axial size " B", are in line with international standards IEC72
二 Demonstration of the type
For example:
The end cap code:端盖代号: Armature core length code:电枢铁心长度代号:
Motor center height ( mm );电机中心高(毫米):
The fourth series design:第四次系列设计
The whole closed type  :全封闭自冷式DC machine:直流电机
Motor core length code:电机铁心长度代号
number of poles:极数
三.Motor performance
 
1.technical data table data should work according to the following conditions
 a. Not more than 1000 metres above sea level
b. Ambient air temperature is not more than 40 degrees Celsius
c.The working environment should not contain acid, alkali and other corrosive effect on the insulation gas
d. motor for continuous working system ( S1 )
 e:The armature circuit and the excitation circuit of E. motor by static rectifier power supply, also adapted by DC power supply
f:This series motor performance conforms to the national standard GB755-87 " rotary motor basic technical requirements " also with reference to the International Electrotechnical Commission Standard IEC34-1 or the German national standard DIN57530 requirements.  2  to derive 220V, 400V or other voltage .                                              
3  Motor speed is 3000,1500,750 rpm, a total of 4 stalls. To reduce the excitation voltage is constant power speed, speed range, see technical data sheet, reduce the armature voltage is constant torque speed. In the armature current continuous conditions, the minimum speed of 20 rpm, at this time still can maintain the rated torque, speed smooth..
 4  Standard excitation voltage of 180 volts, other excitation voltage can be negotiated  .In order to ensure that the insulating reliability of excitation system, the excitation circuit is disconnected, shall be connected in parallel at two ends of the excitation winding a release of resistance, to prevent the self-induction, in standard excitation voltage when its value is about seven times the excitation winding resistance ( cold ), excitation voltage higher than the standard value, shunt release resistance value can be less than seven times, and seven times greater than.
 5  The outlet box the motor provides a ground sign posts.
 6 technical data sheet of the efficiency value of the rated power, rated voltage and speed efficiency, it includes excitation loss
四  Brief introduction of structure
1. Protection grade of the motor is IP44
2. Cooling motor for IC0041 full closed type
3. Install motor in accordance with international GB997-81, IMB3, IMB5, IMB35, IMV1, IMV15, IMV3, IMV36
4.The motor casing surface with radiating ribs, the outlet box cover above the commutator side
 5  Non rotating motor side can be equipped with tachogenerator, encoders and other accessories
五.Order goods note
1. Before ordering, please refer to the product catalog, specifications and other data clearly required products, such as the different specifications and directory, or have special requirements, please put forward specific requirements, in consultation with the relevant departments of our factory, with the consent of the signing of the contract or the tentative agreement.
2. When ordering, please indicate the type of motor, power, voltage, speed, working system, structure types, excitation system, the excitation voltage, the number of axles, the outlet box position, as well as required with accessories, spare parts name
3. As the use of special circumstances, need to wet tropical type, prototype number please indicate " TH "
 
 


  Mode
Rated
 Power
Rated
Speed
Weak Magetism
 Speed
Armature
 Current
Excition
 Power
Efficience
Moment of
 inertia
Weight
Pn
nN
nf
In
Pr
m
GD2
  Wt
kw
r/min
r/min
A
W
%
kg.m2
  Kg
ZBL4-
100-1
1.1
3000
3600
8.4
120
74.9
0.044
60
0.75
1500
3000
5.7
71.6
0.55
1000
2000
4.4
67.7
ZBL4-
100-2
1.5
3000
3600
11.2
120
79.7
0.056
70
1.1
1500
3000
8.1
77.6
0.75
1000
2000
5.8
71.9
0.55
750
1500
4.4
67
1.5
2680
3600
4.5
81.1
1.5
3000
3000
4
81.3
ZBL4-
100-3
2.2
3000
3600
15.8
120
84.2
0.076
85
1.5
1500
3000
10.9
80.1
0.75
750
1500
5.8
71.9
2
2700
3600
5.8
85
2.2
3000
3600
5.7
85.4
1.3
1370
3000
3.9
81.3
1.5
1500
3000
3.9
82.2
ZBL4-
112/2-3
3
3000
3600
21.8
140
83.5
0.108
95
1.1
1000
2000
8.1
74.5
2.7
2700
3600
7.8
83.7
2
2700
3600
7.9
84.3
ZBL4-
112/2-4
2.2
1500
3000
15.9
140
81.6
0.144
115
1.5
1000
2000
11
78.2
1.1
750
1500
8.3
73.4
2
1360
3000
5.8
82.5
2.2
1500
3000
5.7
83.3
1.3
910
2000
3.9
78.1
1.5
1000
2000
4
79.6
ZBL4-
132-2
4
3000
3600
29.1
170
83.3
0.4
140
3
1500
3000
21.7
83
2.2
1000
2000
16.4
79
1.5
750
1500
11
74
4
2750
3600
11.6
84.2
4
3000
3600
10.4
84.4
3
1390
3000
8.7
85
3
1500
3000
7.7
85
2.2
935
2000
6.5
82
2.2
1000
2000
5.8
82
1.5
685
1500
4.5
77.1
1.5
750
1500
4
77.7
ZBL4-
132-3
5.5
3000
3600
39.7
190
85.3
0.48
165
4
1500
3000
28.1
84.7
3
1000
2000
21.5
82.4
2.2
750
1500
16
80.2
5
2670
3600
14.2
87.2
5.5
3000
3600
14.1
87.4
3.7
1320
3000
10.5
86.1
4
1500
3000
10.2
86.4
2.8
880
2000
8.2
83.2
3
1000
2000
7.8
83.5
2
680
1500
5.9
80.6
2.2
750
1500
5.9
81.8
ZBL4-
160-31
5.5
1500
3000
38.7
230
85.5
0.88
250
4
1000
2000
38.2
84.6
3
750
1500
21.3
81.6
7.5
2700
3600
21
87.7
7.5
3000
3600
19.2
88
5.5
1360
3000
15.4
87
5.5
1500
3000
13.9
87.4
4
900
2000
11.4
84.5
4
1000
2000
10.3
85.1
3
680
1500
8.6
82.2
3
750
1500
7.7
82.9
ZBL4-
180-21
5.5
1000
2000
38.7
230
84.7
1.72
330
4
750
1500
28.9
82.3
11
2700
3600
30.5
88.7
11
3000
3600
27.8
89
7
1360
3000
19.6
87.7
7.5
1500
3000
18.9
88
5
900
2000
14.2
85.3
5.5
1000
2000
14
86.1
4
680
1500
11.6
83.1
4
750
1500
10.3
83.9
ZBL4-
180-31
13.6
2700
3600
37.4
250
90.3
1.92
360
15
3000
3600
37.4
90.5
ZBL4-
180-41
5.5
750
1500
38.6
260
84.8
2.2
390
9.5
1360
3000
26.1
88.8
11
1500
3000
27.4
89
7
895
2000
19.4
87.5
7.5
1000
2000
18.8
88.1
5
675
1500
14
85.6
5.5
750
1500
13.8
86.3
ZBL4-
180-51
6.8
680
1500
18.9
270
86.5
2.52
430
7.5
750
1500
18.7
87.3

 

 

  • On a product: Z DC Series Motor

  • Under a product: The ZYZJ series DC motor
  • Copyright:Jiangsu Kelon Dc Motor Manufacturing Co., Ltd
    Tel:0514-88223630 88228425 88238287 苏ICP备05015556号